How to install a Yoder Smoker Thermometer

Tools Required:

1. Tape Measure

2. Painters Tape

3. Chalk Pen

4. Punch

5. .53” (17/32”) Drill bit for metal

6. Power Drill

7. Small Flat Blade (jewelers) Screwdriver

8. Yoder Thermometer kit

Instructions:

1. Measure then mark the place where you want to install the thermometer

2. place painters tape in a cross pattern

3. Tap the center of the mark

4. Drill using a 17/32” drill bit used for metal

5. Clean the area

6. Install the base

7. Hold on to it and raise the front to access the back of the base

8. Tighten with the nut in the kit.

9. Loosen the screw on the front of the base.

10. Install the thermometer and tighten the screw to secure the thermometer.

Watch how I did it in the YouTube video…. https://youtu.be/q5gTaRo8iFg